Automatic Air Vent

Multi-turn Hose Bibb The multi-turn valve core design of the Multi-turn Hose Bibb can precisely adjust the water output. It is suitable for wall-mounted or outdoor pipelines. During operation, the slow start and stop of water flow, as well as precise control, are achieved by rotating the handle. It is applicable to scenarios such as home courtyard irrigation, outdoor cleaning, car washing, and garden watering. It is an outdoor plumbing fitting that balances practicality and durability. Model No.: JX-0517 Pipe Size: 1/2″,3/4″ Body Material: Brass Handle Type: T-Handle End Connection: MNPT/SWT x GHT Turn Type: Multiturn Application: Water, oil, and other non-corrosive liquids Working pressure: 125PSI Working temperature: -10 to 120°C Quality standard EN13828, EN228-1 End Connection BSP, NPT Standard: cUPC, NF Not suitable for drinking water   Single-Handle Pull-Out Sprayer Kitchen Faucet The pull-out spray head of the Single-Handle Pull Out Sprayer Kitchen Faucet supports 3 water outlet modes. It can meet the needs of washing vegetables, washing dishes, rinsing the sink, etc. The spray head can be flexibly pulled out to reach every corner of the sink, leaving no cleaning dead spots. It automatically resets when retracted, staying stable without shaking. It is used in scenarios such as home kitchens, restaurant back kitchens, commercial cooking stations, etc. Model No.: JX-2005 Faucet Height (in.): 15 in Material: Stainless steel 304 Finishing: Brushed, Matte Black, Chrome Plating The retractable nylon sprayer hose with 27.5 in. extension 360 rotation enables easy access to every corner of the sink 3 Water Modes: Stream, Spray, and Dual-Sweep modes Brass nut, Ceramic disc spool Comes with hot & cold hoses and a deck plate Flow rate (gallons per minute): 1.8 Faucet Hole Fit: Single Hole   Slim Tap With Green Color Handle Slim Tap With Green Color Handle features a slim and streamlined main body design, paired with a handle made of high-saturation green environmentally friendly material. It has excellent sealing performance and is not easy to fade. The single-handle operation allows precise adjustment of the ratio of cold and hot water as well as the water output flow. It meets basic water needs such as daily hand washing, washing up, and simple cleaning. Model No.: JX-0515 Size: 1/2″, 3/4″ Materials: Brass, CW617N Finishing: Sand blasted, nickel-plated Handle: Aluminum alloy Temperature: -10˚C-100˚C Thread connection: BSP Working pressure: 16 bar Media: Water, Seawater Application: Water System Work pressure: 1.6MPa Tap Standards: ASME, ISO228   90-degree Double-valve Faucet A 90-degree double-valve faucet can split the water flow from a single inlet into two different water devices or pipes to achieve a simultaneous water supply. It is suitable for wall-mounted or countertop installation. It is widely used in scenarios such as hotels, public handwashing areas, and laboratories. Suitable requirements for water flow control efficiency. It can meet basic water needs such as daily handwashing, washing, and cleaning. Model No.: JX-0514 Size: 1/2 inch male inlet and 3/4 inch outlet Material: Chrome-plated brass, PTFE gland, red flat steel handle Two quarter-turn levers nose joint with built-in injector Working pressure: 1.6 MPa Suitable temperature: -10-120℃/14-248 ° F With intake screw thread (BSP) Nominal pressure (PN): 25 bar This faucet is especially suitable for outdoor use It can be used in industrial and domestic, garden, etc.   Brass Plain Bibcock The brass plain bibcock is forged from pure brass. Compact structure, no redundant complex parts. Smooth opening and closing and tight sealing can effectively prevent leakage. With a male threaded connection, it can be connected directly to a hose or used as a straight-through outlet faucet. Easy to install and adaptable. It meets basic water needs such as daily flushing, cleaning, and temporary water supply, and is a practical, durable, and cost-effective basic plumbing fitting. Model No.: JX-0504 Size: 1/2″, 3/4″ Material: Brass, CW617N Full brass, including handle Forged brass with sandblasted Works pressure: PN16 Standard: EN331, ISO228 Working Temperature: From 0℃ To 95 ℃ Seat sealing Material: PTFE Thread connection: BSP, G, BSPT, NPT Suitable For: Bathroom, kitchen Wall Mount Installation Type   Tall Basin Mixer Tap The single handle of the Tall Basin Mixer Tap precisely controls the mixing ratio of cold and hot water as well as the water flow rate. The tall water outlet design is suitable for various basins, such as deep basins and countertop basins. The water flows vertically downward, which makes it difficult to splash. It is convenient for washing, hair washing, and countertop cleaning. The installation is compatible with most standard holes of bathroom basins. It is widely used in family bathrooms, hotel rooms, B&B washing areas, and other scenarios. It can meet the water needs of daily washing, skin care, shaving, etc. Model No.: JX-2006 Spout Reach: 15.5 cm/ 6.1 inch Spout Height: 26 cm/ 10.23 inch Faucet Body: SS304 Sleek matte black powder-coated finish Valve Core Material: Ceramic Drain Material: Plastic Handle Type: Lever Installation Type: Deck Mounted With a flow rate of 1.2 GPM at 60 PSI Standard: ACS